How to assemble an Ikea Norden table?

Are you struggling to assemble your Ikea Norden table? Are the different components confusing and the never-ending batches of different yet similar screws driving you crazy? Is the manual overwhelming you more than helping? Well, that’s expected. We don’t experience our life through 2D illustrations. How come we have to use a paper manual when the product itself is not two-dimensional. Thus, we will onboard you and assist you with assembling this piece of furniture step by step using a 3D interactive manual.

You can access the 3D manual of this piece of furniture directly using this link.

If you are struggling to assemble an Ektorp sofa, make sure to check out our article “How to assemble an Ikea Ektorp sofa?

Tools and Precautions:

To assemble this piece of furniture you will be needing a screwdriver, a hammer, and a hex key that was delivered to you in the box.

Above all, precaution and organization are key when assembling a flat-packed product. Thus, make sure to have a carpet underneath you before emptying the box. Screw each piece tightly and when in doubt contact us.

You will receive multiple fixation tools in different batches. Thus, make sure to organize them according to the following categories. This step will help immensely when it comes to identifying the needed piece later on.

You’ll find a set of four Ikea floor slide protectors, a set of four hinges, and four tarva metric screws. You will also get a set of forty-eight medium screwseight wood dowels, a set of four tlx flat screws, a set of forty-two euro screws, four nut sleeves, tow plugs, and two metal holders.

Step by Step to assemble the Ikea Norden table :

Assemble structure of Norden table:

First, align the two legs that they are facing each other, insert two wood dowels on each side of the smallholders. Secure the two holders on each side of the legs while making sure that the two holes in them are facing downwards. 

Insert the two metal holders on top of the legs and secure them using 4 screws from the set of 42 and a screwdriver.

assemble Norden table

Now we focus on the top of the table.  Insert the two small wood pieces on each side with the two screws from the set of four. Tighten them using a screwdriver. 

Importantly, insert the four hinges with 32 screws from the set of 42 and secure them.

assemble Norden table

When the top is ready, turn the legs upside down. Insert the four long screws on each side of both legs and secure them using the hex key. Add the four net sleeves in the four different slots of the wood holders and tighten them.

assemble Norden table

Add the legs to the top of the table using the remaining 6 screws from the set of 42 and secure them tightly. Insert four slide protectors in the leg and hammer them in. Add the two plugs in the moving part of the legs and secure them using the hammer as well.

Assemble the drawers of the Norden table:

Now the structure of the table is ready we will move on to the drawers. First, Insert two side walls to the back, add four screws from the set of 48. Secure them using the hammer.

Then, slide in the bottom part, add the front wall. Using a hammer and 4 screws from the same set, secure the wall tightly.

Repeat the same process to the other Five drawers.

assemble Norden table

Finally, add your finished drawers to the table and voila your Norden is ready for you to enjoy.

assemble Norden table

That’s it your Ikea Ektorp Sofa is ready without the burden and overwhelming feelings of assembling flat-packed furniture. If you want to find other 3D manuals for other furniture make sure to check our platform.

assemble Norden table
Courtesy of Ikea

How to assemble an Ikea EKTORP Sofa?

We all agree that assembling flat-packed furniture from Ikea can be not only a difficult task but also extremely annoying. Indeed the Ektorp sofa, for example, will appear as an easy object to assemble but dealing with such a heavy product with very little to none clear instructions from a paper manual can be a burden. That’s why we will assist you with assembling it using a 3D interactive manual. You will also find a detailed step by step video that will transform the experience of putting together the sofa from overwhelming to enjoyable.

If you are struggling to assemble a Poäng chair as well then make sure to check out our article “How to assemble an Ikea POÄNG Chair?

Tools and Precautions:

You won’t need any tools to assemble the EKTORP Sofa. Every fixation tool will be inserted and secured using your hands.

Precaution and organization are key when assembling a flat-packed product. Thus make sure to have a carpet underneath you before emptying the box. Screw each piece tightly and when in doubt contact us.

Step by Step assembly of Ikea Ektorp sofa :

After making sure we have all the needed items we will start assembling. First, Locate the designated wholes in each of the bottom parts of the arm. Hand-screw the threaded pins in their designated wholes and on the corresponding side of the arm until they’re firmly secure.

ektorp

The second step would be assembling the arm and the base. Secure the arm in the base core of the sofa. Make sure both lower pins and the side pin go into their designated spots. Secure the pins with washers and nuts from the other side while making sure that both ways are screwed all the way in, as highlighted in the 3D design. Now you just have to repeat the same process with the other arm.

Finally, all you need to do is to hand screw the supports into their designated place in the corners of the base and place the cushions on top.

That’s it your Ikea Ektorp Sofa is ready for you to enjoy while lounging around and watching your favorite TV show. It was easy, wasn’t it? If you want to find other 3D manuals for other furniture make sure to check our platform.

ektorp
Courtesy of bemz

How to assemble an Ikea POÄNG Chair?

Have You bought an Ikea POÄNG chair and can’t seem to know how to assemble it? Are there different parts that are hard to distinguish between one another? Is the instruction manual confusing you more than helping? Don’t you worry, you came to the right place. We will onboard you and assist you with assembling this piece of furniture step by step using a 3D interactive manual.

You can access the 3D manual of this piece of furniture directly using this link.

If you want to know the added value of 3D manuals make sure to check our article “Why is 3D the future of product manuals?”

Tools and Precautions:

To assemble the POANG Chair you will only need a hexagon key. If you don’t own one you can buy it using this link.

Precaution and organization are key when assembling a flat-packed product. Thus make sure to have a carpet underneath you before emptying the box. Screw each piece tightly and when in doubt contact us.

After laying down a carpet, open the box to check what’s inside. You will find multiple parts ana batches of screws. We will help you identify each piece.

You will also find a paper manual just make sure to dispose of it in an environmentally friendly manner.

Here is what you will find inside of the delivered box:

Step by Step assembling of Ikea POÄNG chair :

After making sure we have all the needed items we will start assembling. First, insert the 4 back pieces to one of the holders and make sure that the side with the velcro is facing the front. Add the second holder and insert the set of 8 screws on each side of the back and tighten them using the hexagon key 

The second step would be assembling the back and the seat using two screws from the set of six. Insert the two parts of the seat in the cloth and then insert them using the four remaining screws from the same set.  

Now we take the chair arms and insert them to one of the sides using a washer and your set of two screws. We then add the front and back holder and insert them using a nut sleeve and one of the screws from the set of four. Repeat the same process on the other side.  

Finally, add the cushion and the chair base while making sure to align it with the velcro on the back.

That’s it your Ikea POÄNG Chair is ready for you to enjoy while sipping on coffee and reading your favorite book. It was easy, wasn’t it? If you want to find other 3D manuals for other furniture make sure to check our platform.